BJSWR - 56 1002-20 RSTRT LATEX ENAMEL GLOSS WHITE
- MSDS: BJSWR
- Manufacturer: VALSPAR CORP
- Product Name: 56 1002-20 RSTRT LATEX ENAMEL GLOSS WHITE
- National Stock Number: 8010-00F013761
Product Identification
Product ID:56 1002-20 RSTRT LATEX ENAMEL GLOSS WHITE
MSDS Date:12/01/1988
FSC:8010
NIIN:00F013761
MSDS Number: BJSWR
Responsible Party
MINNEAPOLIS, MN 55415
Emergency Phone: (800) 228-5635
Info Phone: (612) 332-7371
Cage: 06758
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 20 - 25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILICA AMORPHOUS HYDRATED, SILICEOUS EARTH, FUMED
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 1%
OSHA PEL 80 MG/CUM (%SIO2+2)
ACGIH TLV: 0.2 MG/CUM RESP/DUST
PROPANOIC ACID, 2-METHYL, MONOESTER
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: 1%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL TO BRAIN, NERVOUS
& RESPIRATORY SYSTEM, DIZZINESS, HEADACHE, NAUSEA, & RESPIRATORY
IRRITATION. EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HARMFUL TO BRAIN, NERVOUS &
RESPIRATORY SYSTEM, DIZZINESS, HEADACHE, NAUSEA, & RESPIRATORY
IRRITATION. EYES/SKIN: IRRITATION.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE AREA. IF BREATHING HAS
STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION. EYES: FLUSH W/WATER FOR
15 MINS. SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:141F
Lower Limits:3.0%
Upper Limits:13.0%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & AIR
MASKS. USE WATER SPRAY TO KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:WON'T SUSTAIN COMBUSTION.
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DON'T STORE >120F. KEEP FROM FREEZING. EMPTY CONTAINERS MAY
CONTAIN PRODUCT RESIDUE.
Other Precautions:ALL LABEL WARNINGS MUST BE OBSERVED UNTIL CONTAINER
HAS BEEN CLEANED, RECONDITIONED, OR PROPERLY DISPOSED OF. DON'T
CUT, PUNCTURE, OR WELD CONTAINERS.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING & AFTER APPLICATION UNLESS
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:CLOTHING FOR PAINTING OPERATIONS
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Pres:24.0
Vapor Density:7.4
Spec Gravity:1.26
Evaporation Rate & Reference:(BU AC = 1): 0.4
Solubility in Water:COMPLETE
Appearance and Odor:NORMAL
Percent Volatiles by Volume:67.78%
Stability
Stability Indicator/Materials to Avoid:YES
WATER-REACTIVE MATERIALS
Stability Condition to Avoid:FREEZING. DON'T STORE >120F.
Hazardous Decomposition Products:CO, CO2, METAL OXIDES
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN MANNER
THAT COMPLIES W/LOCAL, STATE, & FEDERAL REGULATIONS. DON'T
INCINERATE CLOSED CONTAINERS. WON'T SUSTAIN COMBUSTION. DON'T
PUNCTURE CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.